Decorative Entablature

Decorative entablature pieces let you build the classical band of cornice, frieze and architrave over a front door, a bay or along the top of a facade. The range includes facade cornices and friezes in 2 m lengths with ready-made corner pieces, plus the capitals, shafts and bases of Gaudi’s smaller facade columns. Made from lightweight, moisture-resistant polyurethane, they give the look of carved stone without the weight or cost, and are finished with exterior masonry paint once fixed.

Showing 37–53 of 53 results

  • 4.42.301.10

    Entablature 4.42.301

    Height 1455 mm.

    €161.20

    A fluted column shaft, 1455 mm long, for one of Gaudi’s smaller full round facade columns, with a shaft of about 1.5 m. It can be trimmed if you need it shorter. Although we list it under entablature, it is a column part, designed to go with Entablature 4.41.301 (capital), Entablature 4.43.301 (base) and Entablature…

  • 4.43.101.10

    Entablature 4.43.101

    Dimensions: 120 x 296 x 296 mm.

    (Height x Width x Depth)

    €61.70

    A moulded round base on a square plinth, 296 mm square and 120 mm high, the base of one of Gaudi’s smaller full round facade columns, with a shaft of about 1.5 m. Although we list it under entablature, it is a column part, designed to go with Entablature 4.41.101 (capital) and Entablature 4.42.101 (shaft)…

  • 4.43.201.10

    Entablature 4.43.201

    Height 115 mm.

    €57.70

    A round moulded base with stacked torus mouldings and no square plinth, 115 mm high, the base of one of Gaudi’s smaller full round facade columns, with a shaft of about 1.5 m. Although we list it under entablature, it is a column part, designed to go with Entablature 4.41.201 (capital) and Entablature 4.42.201 (shaft)…

  • 4.43.202.10

    Entablature 4.43.202

    Dimensions: 115 x 272 x 272 mm.

    (Height x Width x Depth)

    €64.70

    A moulded round base on a square plinth, 272 mm square and 115 mm high, the base of one of Gaudi’s smaller full round facade columns, with a shaft of about 1.5 m. Although we list it under entablature, it is a column part, designed to go with Entablature 4.41.201 (capital) and Entablature 4.42.201 (shaft)…

  • 4.43.301.10

    Entablature 4.43.301

    Dimensions: 108 x 244 x 244 mm.

    (Height x Width x Depth)

    €64.70

    A moulded round base on a square plinth, 244 mm square and 108 mm high, the base of one of Gaudi’s smaller full round facade columns, with a shaft of about 1.5 m. Although we list it under entablature, it is a column part, designed to go with Entablature 4.41.301 (capital) and Entablature 4.42.301 (shaft)…

  • 4.43.302.10

    Entablature 4.43.302

    Dimensions: 108 x 244 x 244 mm.

    (Height x Width x Depth)

    €64.70

    A moulded round base on a square plinth, 244 mm square and 108 mm high, the base of one of Gaudi’s smaller full round facade columns, with a shaft of about 1.5 m. Although we list it under entablature, it is a column part, designed to go with Entablature 4.41.301 (capital) and Entablature 4.42.301 (shaft)…

  • 4.45.101.10

    Entablature 4.45.101

    Dimensions: 127 x 135 x 270 mm.

    €39.80

    A plain Tuscan capital with a square moulded abacus, 270 mm wide, 127 mm high and 135 mm deep, the capital of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list it under entablature, it…

  • 4.45.201.10

    Entablature 4.45.201

    Dimensions: 116 x 120 x 294 mm.

    €26.90

    An Ionic capital with scrolled volutes and an egg-and-dart band, 293 mm wide, 116 mm high and 122 mm deep, the capital of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list it under entablature,…

  • 4.45.301.10

    Entablature 4.45.301

    Dimensions: 208 x 132 x 265 mm.

    €29.90

    A Corinthian capital carved with acanthus leaves, corner volutes and a central rosette, 262 mm wide, 208 mm high and 133 mm deep, the capital of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list…

  • 4.46.101.10

    Entablature 4.46.101

    Height 1520 mm.

    €107.50

    A smooth column shaft, 1520 mm long, for one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in section, so it sits flat against the wall. It can be trimmed if you need it shorter. Although we list it under entablature, it is a column part, designed…

  • 4.46.201.10

    Entablature 4.46.201

    Height 1580 mm.

    €88.60

    A fluted column shaft, 1575 mm long, 198 mm wide and 99 mm deep, for one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in section, so it sits flat against the wall. It can be trimmed if you need it shorter. Although we list it under…

  • 4.46.301.10

    Entablature 4.46.301

    Height 1460 mm.

    €73.60

    A fluted column shaft, 1459 mm long, 182 mm wide and 88 mm deep, for one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in section, so it sits flat against the wall. It can be trimmed if you need it shorter. Although we list it under…

  • 4.47.101.10

    Entablature 4.47.101

    Dimensions: 120 x 148 x 292 mm.

    €28.90

    A moulded base on a plinth, 292 mm wide, 120 mm high and 148 mm deep, the base of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list it under entablature, it is a column…

  • 4.47.201.10

    Entablature 4.47.201

    Height 115 mm.

    €26.90

    A round moulded base with stacked torus mouldings and no plinth, 272 mm wide, 115 mm high and 136 mm deep, the base of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list it under…

  • 4.47.202.10

    Entablature 4.47.202

    Dimensions: 115 x 136 x 272 mm.

    €29.90

    A moulded base on a plinth, 270 mm wide, 117 mm high and 136 mm deep, the base of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list it under entablature, it is a column…

  • 4.47.301.10

    Entablature 4.47.301

    Dimensions: 108 x 122 x 244 mm.

    €29.90

    A moulded base on a plinth, 244 mm wide, 107 mm high and 122 mm deep, the base of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list it under entablature, it is a column…

  • 4.47.302.10

    Entablature 4.47.302

    Dimensions: 108 x 122 x 244 mm.

    €29.90

    A moulded base on a plinth, 243 mm wide, 107 mm high and 122 mm deep, the base of one of Gaudi’s smaller facade half columns, with a shaft of about 1.5 m. It is half-round in plan, so it sits flat against the wall. Although we list it under entablature, it is a column…

Decorative Entablature for the Facade

A decorative entablature is the classical band of cornice, frieze and architrave that crowns a doorway, a bay or the top of a wall. This collection gives you the building blocks to create one on the outside of your house: a grand, stone-look head over a front door, or a continuous band that ties a facade together.

What's in the Range

  • Facade cornices (4.32): 2 m lengths in plain and dentilled profiles, with ready-made external and internal corners.
  • Friezes (4.33): plain bands in deep boxed and slim flat versions, each with a matching corner piece.
  • Small column parts (4.41 to 4.47): capitals, shafts and bases for Gaudi's smaller facade columns and half columns.

Why Polyurethane?

Every piece is lightweight polyurethane foam, so one person can lift and fix it with adhesive, without the weight, cost or wet trades of stone or sand-and-cement mouldings. It won't rot or swell in the rain, and joints are bonded with joint adhesive. Every piece arrives white and should be finished with a good exterior masonry paint once fixed; the painted finish protects the surface from sun and weather and lets you match the colour of your render or stonework.

Complete the Look

Frame the doorway beneath with exterior pilasters, carry the same detail across the windows with a window frame surround and window sills, and add a keystone at the head of an arch. Browse the collection below and order for delivery across Ireland.

Frequently Asked Questions

Find clear answers to common questions about Gaudi Coving products, installation, delivery, and ordering to help you choose the right coving and decorative mouldings with confidence.

We are based in Kylekiproe, Portlaoise, Co. Laois, Ireland, R32 R58W. You’re welcome to contact us directly or visit during our opening hours.

Call us on +353 45 433 585 or Mobile: +353 87 348 8884. You can also email us at [email protected] for enquiries, quotes, and support.

Our physical location is open Tuesday to Saturday, 10:00am–5:00pm.

We accept major credit and debit cards through secure online payment, as well as bank transfers for invoice payments.

With your invoice, you will receive an estimated delivery date and delivery cost. Please note that this is an estimate and not a guaranteed delivery date. In most cases, orders are delivered within up to 5 working days.

Estimated delivery times are calculated based on the full order process, including order preparation, packaging, transfer to the delivery provider, and transit time to the delivery address.

Yes — we deliver our premium coving, skirting, and mouldings across Ireland, helping you complete projects from Dublin to Cork and beyond.

Gaudi Coving mouldings are lightweight, paint-ready, and designed for easy installation using standard adhesives and tools. Accurate measuring, clean mitre cuts, secure fixing, and joint finishing will ensure a professional result. Suitable for experienced DIY and trade installation.

Our coving and mouldings are manufactured from high-density polyurethane and polystyrene. These materials provide excellent strength, sharp detailing, moisture resistance, and long-term dimensional stability.

Yes. All products come with a smooth, paint-ready surface and can be painted using standard water-based or solvent-based interior paints.

Yes. Our mouldings are moisture-resistant, making them suitable for kitchens, bathrooms, and other high-humidity areas when installed correctly.

Yes. We supply flexible coving and moulding options designed for curved walls, arches, and non-linear surfaces.

Absolutely. Our products are widely used by contractors, fit-out specialists, architects, and designers for both residential and commercial applications.