Exterior column sets bring classical presence to a porch, entrance or facade. Each set combines a capital, shaft and base from Gaudi’s facade range, in Tuscan, Ionic or Corinthian styles, as full round columns, half columns that sit flat against the wall, or tall columns built from stacked sections. Made from lightweight, moisture-resistant polyurethane, they give the look of carved stone without the weight, and should be finished with exterior masonry paint. They are decorative rather than structural, so they must never carry a porch roof, canopy or balcony.
Showing 1–36 of 58 results
Dimensions: 199 x 482 x 482 mm.
(Height x Width x Depth)
A moulded round base on a square plinth, the foot of a full round exterior column, 487 mm square and 198 mm high. It is part of Column 4.30.103, and is sold separately for repairs, replacements or your own combination of parts. Like the rest of the facade range it is polyurethane foam: light, moisture…
Dimensions: 217 x 507 x 507 mm.
(Height x Width x Depth)
A moulded round base on a square plinth, the foot of a full round exterior column, 506 mm square and 215 mm high. It is part of Column 4.30.205, Column 4.30.206, Column 4.30.306 and Column 4.30.307, and is sold separately for repairs, replacements or your own combination of parts. Made in lightweight polyurethane foam, it…
Dimensions: 179 x 435 x 435 mm.
(Height x Width x Depth)
A moulded round base on a square plinth, the foot of a full round exterior column, 440 mm square and 180 mm high. It is part of Column 4.30.101 and Column 4.30.102, and is sold separately for repairs, replacements or your own combination of parts. It is polyurethane foam, supplied white and ready to paint….
Dimensions: 170 x 412 x 412 mm.
(Height x Width x Depth)
A round moulded base with stacked torus mouldings and no square plinth, the foot of a full round exterior column, 412 mm across and 170 mm high. It isn’t part of one of our ready-made sets, so it suits your own combination of parts or replacing a damaged piece. Like the rest of the facade…
Dimensions: 170 x 412 x 412 mm.
(Height x Width x Depth)
A moulded round base on a square plinth, the foot of a full round exterior column, 411 mm square and 170 mm high. It is part of Column 4.30.201 and Column 4.30.202, and is sold separately for repairs, replacements or your own combination of parts. Made in lightweight polyurethane foam, it won’t rot or swell…
Dimensions: 164 x 370 x 370 mm.
(Height x Width x Depth)
A moulded round base on a square plinth, the foot of a full round exterior column, 370 mm square and 164 mm high. It isn’t part of one of our ready-made sets, so it suits your own combination of parts or replacing a damaged piece. It is polyurethane foam, supplied white and ready to paint….
Dimensions: 164 x 370 x 370 mm.
(Height x Width x Depth)
A moulded round base on a square plinth, the foot of a full round exterior column, 370 mm square and 161 mm high. It is part of Column 4.30.301, and is sold separately for repairs, replacements or your own combination of parts. Like the rest of the facade range it is polyurethane foam: light, moisture…
Dimensions: 199 x 242 x 482 mm.
A moulded base on a plinth, the foot of an exterior half column, 487 mm wide, 198 mm high and 242 mm deep. It is half-round in plan to sit flat against the wall. It is part of Column 4.10.103, and is sold separately for repairs, replacements or your own combination of parts. It is…
Dimensions: 199 x 242 x 482 mm.
A moulded base on a plinth, the foot of an exterior half column, 507 mm wide, 215 mm high and 253 mm deep. It is half-round in plan to sit flat against the wall. It is part of Column 4.10.205, Column 4.10.206, Column 4.10.306 and Column 4.10.307, and is sold separately for repairs, replacements or…
Dimensions: 180 x 218 x 435 mm.
A moulded base on a plinth, the foot of an exterior half column, 440 mm wide, 180 mm high and 217 mm deep. It is half-round in plan to sit flat against the wall. It is part of Column 4.10.101 and Column 4.10.102, and is sold separately for repairs, replacements or your own combination of…
Height 170 mm.
A moulded base, the foot of an exterior half column, 170 mm high. It is half-round in plan to sit flat against the wall. It isn’t part of one of our ready-made sets, so it suits your own combination of parts or replacing a damaged piece. It is polyurethane foam, supplied white and ready to…
Dimensions: 170 x 206 x 410 mm.
A moulded base on a plinth, the foot of an exterior half column, 411 mm wide, 171 mm high and 204 mm deep. It is half-round in plan to sit flat against the wall. It is part of Column 4.10.201 and Column 4.10.202, and is sold separately for repairs, replacements or your own combination of…
Dimensions: 164 x 184 x 370 mm.
A moulded base on a plinth, the foot of an exterior half column, 370 mm wide, 164 mm high and 184 mm deep. It is half-round in plan to sit flat against the wall. It isn’t part of one of our ready-made sets, so it suits your own combination of parts or replacing a damaged…
Dimensions: 164 x 184 x 370 mm.
A moulded base on a plinth, the foot of an exterior half column, 372 mm wide, 160 mm high and 185 mm deep. It is half-round in plan to sit flat against the wall. It is part of Column 4.10.301, and is sold separately for repairs, replacements or your own combination of parts. It is…
Dimensions: 181 x 405 x 125 mm.
(Height x Width x Depth)
A moulded pilaster base, the foot of an exterior pilaster, 408 mm wide, 181 mm high and 125 mm deep. It is flat-backed, made to sit at the foot of a pilaster shaft. It is part of Pilaster 4.20.101 and Pilaster 4.20.102, and is sold separately for repairs, replacements or your own combination of parts….
Dimensions: 172Â x 376 x 119 mm.
(Height x Width x Depth)
A moulded pilaster base, the foot of an exterior pilaster, 375 mm wide, 170 mm high and 120 mm deep. It is flat-backed, made to sit at the foot of a pilaster shaft. It is part of Pilaster 4.20.201 and Pilaster 4.20.202, and is sold separately for repairs, replacements or your own combination of parts….
Dimensions: 161 x 350 x 113 mm.
(Height x Width x Depth)
A moulded pilaster base, the foot of an exterior pilaster, 348 mm wide, 160 mm high and 113 mm deep. It is flat-backed, made to sit at the foot of a pilaster shaft. It is part of Pilaster 4.20.301 and Pilaster 4.20.302, and is sold separately for repairs, replacements or your own combination of parts….
Dimensions: 180 x 408 x 408 mm.
(Height x Width x Depth)
A plain Tuscan capital with a square moulded abacus, made for a full round exterior column. It measures 408 mm square and 180 mm high. It is part of Column 4.30.101 and Column 4.30.102, and is sold separately for repairs, replacements or your own combination of parts. It is polyurethane foam, supplied white and ready…
Dimensions: 240 x 544 x 544 mm.
(Height x Width x Depth)
A large, plain Tuscan capital with a square moulded abacus, made for a full round exterior column. It measures 544 mm square and 240 mm high. It is part of Column 4.30.103, and is sold separately for repairs, replacements or your own combination of parts. Like the rest of the facade range it is polyurethane…
Dimensions: 162 x 362 x 430 mm.
An Ionic capital with scrolled volutes and an egg-and-dart band, made for a full round exterior column. It measures 429 mm wide, 360 mm deep and 164 mm high. It is part of Column 4.30.201 and Column 4.30.202, and is sold separately for repairs, replacements or your own combination of parts. Made in lightweight polyurethane…
Dimensions: 241 x 540 x 635 mm.
A large Ionic capital with deep scrolled volutes and an egg-and-dart band, made for a full round exterior column. It measures 635 mm wide, 536 mm deep and 240 mm high. It is part of Column 4.30.205 and Column 4.30.206, and is sold separately for repairs, replacements or your own combination of parts. It is…
Dimensions: 311 x 395 x 409 mm.
A Corinthian capital carved with acanthus leaves, corner volutes and a central rosette, made for a full round exterior column. It measures 396 mm square and 313 mm high. It is part of Column 4.30.301, and is sold separately for repairs, replacements or your own combination of parts. Like the rest of the facade range…
Dimensions: 510 x 652 x 652 mm.
(Height x Width x Depth)
A grand Corinthian capital, deeply carved with tiers of acanthus leaves and corner volutes, made for a full round exterior column. It measures 652 mm square and 510 mm high. It is part of Column 4.30.306 and Column 4.30.307, and is sold separately for repairs, replacements or your own combination of parts. Made in lightweight…
Dimensions: 180 x 204 x 408 mm.
A plain Tuscan capital with a square moulded abacus, made for an exterior half column. It measures 408 mm wide, 181 mm high and 203 mm deep. It is half-round in plan, so it sits flat against the wall. It is part of Column 4.10.101 and Column 4.10.102, and is sold separately for repairs, replacements…
Dimensions: 240 x 272 x 544 mm.
A large, plain Tuscan capital with a square moulded abacus, made for an exterior half column. It measures 543 mm wide, 240 mm high and 272 mm deep. It is half-round in plan, so it sits flat against the wall. It is part of Column 4.10.103, and is sold separately for repairs, replacements or your…
Dimensions: 165 x 181 x 430 mm.
An Ionic capital with scrolled volutes and an egg-and-dart band, made for an exterior half column. It measures 434 mm wide, 161 mm high and 180 mm deep. It is half-round in plan, so it sits flat against the wall. It is part of Column 4.10.201 and Column 4.10.202, and is sold separately for repairs,…
Dimensions: 241 x 270 x 635 mm.
A large Ionic capital with deep scrolled volutes and an egg-and-dart band, made for an exterior half column. It measures 635 mm wide, 240 mm high and 269 mm deep. It is half-round in plan, so it sits flat against the wall. It is part of Column 4.10.205 and Column 4.10.206, and is sold separately…
Dimensions: 112 x 198 x 395 mm.
A Corinthian capital carved with acanthus leaves, corner volutes and a central rosette, made for an exterior half column. It measures 397 mm wide, 313 mm high and 198 mm deep. It is half-round in plan, so it sits flat against the wall. It is part of Column 4.10.301, and is sold separately for repairs,…
Dimensions: 512 x 322 x 655 mm.
A grand Corinthian capital, deeply carved with tiers of acanthus leaves and corner volutes, made for an exterior half column. It measures 644 mm wide, 514 mm high and 327 mm deep. It is half-round in plan, so it sits flat against the wall. It is part of Column 4.10.306 and Column 4.10.307, and is…
Dimensions: 178 x 406 x 124 mm.
(Height x Width x Depth)
A plain Tuscan pilaster capital, made for an exterior pilaster. It measures 406 mm wide, 178 mm high and 124 mm deep. It is flat-backed, made to cap a pilaster shaft. It is part of Pilaster 4.20.101 and Pilaster 4.20.102, and is sold separately for repairs, replacements or your own combination of parts. Like the…
Dimensions: 163 x 446 x 97 mm.
(Height x Width x Depth)
An Ionic pilaster capital with scrolled volutes and an egg-and-dart band, made for an exterior pilaster. It measures 444 mm wide, 167 mm high and 98 mm deep. It is flat-backed, made to cap a pilaster shaft. It is part of Pilaster 4.20.201 and Pilaster 4.20.202, and is sold separately for repairs, replacements or your…
Dimensions: 318 x 418 x 151 mm.
(Height x Width x Depth)
A Corinthian pilaster capital carved with acanthus leaves and a central rosette, made for an exterior pilaster. It measures 417 mm wide, 312 mm high and 151 mm deep. It is flat-backed, made to cap a pilaster shaft. It is part of Pilaster 4.20.301 and Pilaster 4.20.302, and is sold separately for repairs, replacements or…
Dimensions: 700 x 362 x 180 mm.
(Height x Width x Depth)
A shaft section for an exterior half column: a smooth 700 mm section, 363 mm wide, 700 mm high and 180 mm deep. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. Half-round in section, it…
Height 350 mm.
A shaft section for a full round exterior column: the smooth top section, finished with a moulded collar, 435 mm across and 352 mm high. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. It is…
Height 700 mm.
A shaft section for a full round exterior column: a smooth 700 mm section, 361 mm across and 698 mm high. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. It is part of Column 4.30.103,…
Height 350 mm.
A shaft section for a full round exterior column: the fluted top section, finished with a moulded collar, 435 mm across and 351 mm high. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. It is…
Exterior column sets let you build classical columns for a porch, an entrance or a facade from individual parts: a capital, a shaft and a base, sometimes with rings or pedestals. This collection holds those parts, so you can assemble a complete column, replace a damaged piece, or combine parts to suit your own design.
The parts are lightweight polyurethane foam. They give the look of carved stone, but they cannot hold up a porch roof, canopy, balcony or any other load, so they must never stand in for a real column or post.
Parts are joined with joint adhesive and fixed with multipurpose adhesive. Every piece arrives white and should be finished with a good exterior masonry paint once fixed; the painted finish protects the surface from sun and weather and lets you match the colour of your render or stonework.
See the ready-made exterior columns and exterior pilasters for complete sets, and pedestal corbels for columns that start part-way up a wall. Browse the parts below and order for delivery across Ireland.
Find clear answers to common questions about Gaudi Coving products, installation, delivery, and ordering to help you choose the right coving and decorative mouldings with confidence.
We are based in Kylekiproe, Portlaoise, Co. Laois, Ireland, R32 R58W. You’re welcome to contact us directly or visit during our opening hours.
Call us on +353 45 433 585 or Mobile: +353 87 348 8884. You can also email us at [email protected] for enquiries, quotes, and support.
Our physical location is open Tuesday to Saturday, 10:00am–5:00pm.
We accept major credit and debit cards through secure online payment, as well as bank transfers for invoice payments.
With your invoice, you will receive an estimated delivery date and delivery cost. Please note that this is an estimate and not a guaranteed delivery date. In most cases, orders are delivered within up to 5 working days.
Estimated delivery times are calculated based on the full order process, including order preparation, packaging, transfer to the delivery provider, and transit time to the delivery address.
Yes — we deliver our premium coving, skirting, and mouldings across Ireland, helping you complete projects from Dublin to Cork and beyond.
Gaudi Coving mouldings are lightweight, paint-ready, and designed for easy installation using standard adhesives and tools. Accurate measuring, clean mitre cuts, secure fixing, and joint finishing will ensure a professional result. Suitable for experienced DIY and trade installation.
Our coving and mouldings are manufactured from high-density polyurethane and polystyrene. These materials provide excellent strength, sharp detailing, moisture resistance, and long-term dimensional stability.
Yes. All products come with a smooth, paint-ready surface and can be painted using standard water-based or solvent-based interior paints.
Yes. Our mouldings are moisture-resistant, making them suitable for kitchens, bathrooms, and other high-humidity areas when installed correctly.
Yes. We supply flexible coving and moulding options designed for curved walls, arches, and non-linear surfaces.
Absolutely. Our products are widely used by contractors, fit-out specialists, architects, and designers for both residential and commercial applications.
No products in the basket.