Exterior column sets bring classical presence to a porch, entrance or facade. Each set combines a capital, shaft and base from Gaudi’s facade range, in Tuscan, Ionic or Corinthian styles, as full round columns, half columns that sit flat against the wall, or tall columns built from stacked sections. Made from lightweight, moisture-resistant polyurethane, they give the look of carved stone without the weight, and should be finished with exterior masonry paint. They are decorative rather than structural, so they must never carry a porch roof, canopy or balcony.
Showing 37–58 of 58 results
Height 700 mm.
A shaft section for a full round exterior column: a fluted 700 mm section, 361 mm across and 698 mm high. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. It is part of Column 4.30.206…
Height 350 mm.
A shaft section for a full round exterior column: a fluted 350 mm section, 361 mm across and 348 mm high. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. It is part of Column 4.30.206…
Height 2300 mm.
A smooth column shaft for exterior use, 2300 mm long. It forms the body of a full round column, between the base and the capital. It can be trimmed if you need it shorter. It is the shaft that completes Column 4.30.101, which is sold as a capital and base only. Made in lightweight polyurethane…
Height 2300 mm.
A fluted column shaft for exterior use, 2294 mm long and 331 mm across. It forms the body of a full round column, between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.30.102, and is sold separately for repairs, replacements or your own combination…
Height: 2390 mm.
A fluted column shaft for exterior use, 2386 mm long and 294 mm across. It forms the body of a full round column, between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.30.201, and is sold separately for repairs, replacements or your own combination…
Height 2400 mm.
A smooth column shaft for exterior use, 2394 mm long and 294 mm across. It forms the body of a full round column, between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.30.202, and is sold separately for repairs, replacements or your own combination…
Height: 2210 mm.
A fluted column shaft for exterior use, 2198 mm long and 270 mm across. It forms the body of a full round column, between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.30.301, and is sold separately for repairs, replacements or your own combination…
Height 350 mm.
A shaft section for an exterior half column: the fluted top section, finished with a moulded collar, 435 mm wide, 354 mm high and 216 mm deep. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use….
Height 700 mm.
A shaft section for an exterior half column: a fluted 700 mm section, 366 mm wide, 700 mm high and 180 mm deep. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. Half-round in section, it…
Height 350 mm.
A shaft section for an exterior half column: a fluted 350 mm section, 366 mm wide, 348 mm high and 180 mm deep. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use. Half-round in section, it…
Height 2300 mm.
A smooth half-column shaft for exterior use, 2315 mm long, 330 mm wide and 164 mm deep. Half-round in section, it sits flat against the wall between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.10.101, and is sold separately for repairs, replacements or…
Height 2300 mm.
A fluted half-column shaft for exterior use, 2306 mm long, 328 mm wide and 165 mm deep. Half-round in section, it sits flat against the wall between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.10.102, and is sold separately for repairs, replacements or…
Height 2395 mm.
A fluted half-column shaft for exterior use, 2389 mm long, 294 mm wide and 148 mm deep. Half-round in section, it sits flat against the wall between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.10.201, and is sold separately for repairs, replacements or…
Height 2400 mm.
A smooth half-column shaft for exterior use, 2396 mm long, 295 mm wide and 148 mm deep. Half-round in section, it sits flat against the wall between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.10.202, and is sold separately for repairs, replacements or…
Height 2210 mm.
A fluted half-column shaft for exterior use, 2207 mm long, 272 mm wide and 136 mm deep. Half-round in section, it sits flat against the wall between the base and the capital. It can be trimmed if you need it shorter. It is part of Column 4.10.301, and is sold separately for repairs, replacements or…
Dimensions: 2310 x 298 x 70 mm.
(Height x Width x Depth)
A fluted pilaster shaft for exterior use, 2305 mm long, 334 mm wide and 88 mm deep. It is flat, forming the face of a pilaster between its base and capital. It can be trimmed if you need it shorter. It is part of Pilaster 4.20.101, and is sold separately for repairs, replacements or your…
Dimensions: 2310 x 298 x 70 mm.
(Height x Width x Depth)
A plain pilaster shaft for exterior use, 2304 mm long, 333 mm wide and 88 mm deep. It is flat, forming the face of a pilaster between its base and capital. It can be trimmed if you need it shorter. It is part of Pilaster 4.20.102, and is sold separately for repairs, replacements or your…
Dimensions: 2350 x 260 x 62 mm.
(Height x Width x Depth)
A fluted pilaster shaft for exterior use, 2348 mm long, 260 mm wide and 62 mm deep. It is flat, forming the face of a pilaster between its base and capital. It can be trimmed if you need it shorter. It is part of Pilaster 4.20.201, and is sold separately for repairs, replacements or your…
Dimensions: 2350 x 260 x 62 mm.
(Height x Width x Depth)
A plain pilaster shaft for exterior use, 2343 mm long, 260 mm wide and 62 mm deep. It is flat, forming the face of a pilaster between its base and capital. It can be trimmed if you need it shorter. It is part of Pilaster 4.20.202, and is sold separately for repairs, replacements or your…
Dimensions: 2200 x 292 x 86 mm.
(Height x Width x Depth)
A fluted pilaster shaft for exterior use, 2197 mm long, 294 mm wide and 86 mm deep. It is flat, forming the face of a pilaster between its base and capital. It can be trimmed if you need it shorter. It is part of Pilaster 4.20.301, and is sold separately for repairs, replacements or your…
Dimensions: 2200 x 248 x 86 mm.
(Height x Width x Depth)
A plain pilaster shaft for exterior use, 2200 mm long, 248 mm wide and 86 mm deep. It is flat, forming the face of a pilaster between its base and capital. It can be trimmed if you need it shorter. It is the shaft that completes Pilaster 4.20.302, which is sold as a capital and…
Dimensions: 350 x 362 x 180 mm.
(Height x Width x Depth)
A shaft section for an exterior half column: the smooth top section, finished with a moulded collar, 432 mm wide, 354 mm high and 216 mm deep. Gaudi build their tallest columns from stacked sections rather than one long shaft, so the height can be set by the number of 700 mm sections you use….
Exterior column sets let you build classical columns for a porch, an entrance or a facade from individual parts: a capital, a shaft and a base, sometimes with rings or pedestals. This collection holds those parts, so you can assemble a complete column, replace a damaged piece, or combine parts to suit your own design.
The parts are lightweight polyurethane foam. They give the look of carved stone, but they cannot hold up a porch roof, canopy, balcony or any other load, so they must never stand in for a real column or post.
Parts are joined with joint adhesive and fixed with multipurpose adhesive. Every piece arrives white and should be finished with a good exterior masonry paint once fixed; the painted finish protects the surface from sun and weather and lets you match the colour of your render or stonework.
See the ready-made exterior columns and exterior pilasters for complete sets, and pedestal corbels for columns that start part-way up a wall. Browse the parts below and order for delivery across Ireland.
Find clear answers to common questions about Gaudi Coving products, installation, delivery, and ordering to help you choose the right coving and decorative mouldings with confidence.
We are based in Kylekiproe, Portlaoise, Co. Laois, Ireland, R32 R58W. You’re welcome to contact us directly or visit during our opening hours.
Call us on +353 45 433 585 or Mobile: +353 87 348 8884. You can also email us at [email protected] for enquiries, quotes, and support.
Our physical location is open Tuesday to Saturday, 10:00am–5:00pm.
We accept major credit and debit cards through secure online payment, as well as bank transfers for invoice payments.
With your invoice, you will receive an estimated delivery date and delivery cost. Please note that this is an estimate and not a guaranteed delivery date. In most cases, orders are delivered within up to 5 working days.
Estimated delivery times are calculated based on the full order process, including order preparation, packaging, transfer to the delivery provider, and transit time to the delivery address.
Yes — we deliver our premium coving, skirting, and mouldings across Ireland, helping you complete projects from Dublin to Cork and beyond.
Gaudi Coving mouldings are lightweight, paint-ready, and designed for easy installation using standard adhesives and tools. Accurate measuring, clean mitre cuts, secure fixing, and joint finishing will ensure a professional result. Suitable for experienced DIY and trade installation.
Our coving and mouldings are manufactured from high-density polyurethane and polystyrene. These materials provide excellent strength, sharp detailing, moisture resistance, and long-term dimensional stability.
Yes. All products come with a smooth, paint-ready surface and can be painted using standard water-based or solvent-based interior paints.
Yes. Our mouldings are moisture-resistant, making them suitable for kitchens, bathrooms, and other high-humidity areas when installed correctly.
Yes. We supply flexible coving and moulding options designed for curved walls, arches, and non-linear surfaces.
Absolutely. Our products are widely used by contractors, fit-out specialists, architects, and designers for both residential and commercial applications.
No products in the basket.